Benefits of DIAMECH Soft-Bearing Balancing Machines
Highest balance sensitivity
The free moving suspensions and support rollers provide a high degree of sensitivity because they do not restrain the free vibratory motion of the rotor. This provides for optimum balancing accuracy at low rotational speeds, and linear response to unbalance vibration displacement throughout the balancing speed range.
High-precision balancing at lower and safer balancing speeds
The practical use have shown that DIAMECH machines can achieve specified balance tolerances at speeds 160 - 600 rpm, whereas rotors in hard bearing machines may need 800 -1500 rpm to meet the same quality standards.
Self-aligning flat rollers
The self-aligning, flat rollers obviate the need for time consuming alignment and levelling procedures and make sure of line contact with the rotor journals under all normal conditions of operation, thereby preventing journal damage and ensuring ease of set up for a wide range of journal diameters
Not required special foundations
The balancing speed range of this type of machine is above the natural frequency of the suspension system, and the rotor is essentially isolated by the pendulum action of the suspensions. Its performance is therefore not influenced by the mass and/or stiffness of the supporting structure and foundations. Hence, the machine can be mounted very easily and quickly at any location that is capable of supporting its static weight and that of the rotor
Mobility
The principle of operation is such that machines can be manufactured using a lightweight airframe construction which, together with the fact that only minimal power is needed to drive the rotors at low and safe speeds, provides for a compact, selfcontained and lightweight system which is ideal for transporting.
The free moving suspensions and support rollers provide a high degree of sensitivity because they do not restrain the free vibratory motion of the rotor. This provides for optimum balancing accuracy at low rotational speeds, and linear response to unbalance vibration displacement throughout the balancing speed range.
High-precision balancing at lower and safer balancing speeds
The practical use have shown that DIAMECH machines can achieve specified balance tolerances at speeds 160 - 600 rpm, whereas rotors in hard bearing machines may need 800 -1500 rpm to meet the same quality standards.
Self-aligning flat rollers
The self-aligning, flat rollers obviate the need for time consuming alignment and levelling procedures and make sure of line contact with the rotor journals under all normal conditions of operation, thereby preventing journal damage and ensuring ease of set up for a wide range of journal diameters
Not required special foundations
The balancing speed range of this type of machine is above the natural frequency of the suspension system, and the rotor is essentially isolated by the pendulum action of the suspensions. Its performance is therefore not influenced by the mass and/or stiffness of the supporting structure and foundations. Hence, the machine can be mounted very easily and quickly at any location that is capable of supporting its static weight and that of the rotor
Mobility
The principle of operation is such that machines can be manufactured using a lightweight airframe construction which, together with the fact that only minimal power is needed to drive the rotors at low and safe speeds, provides for a compact, selfcontained and lightweight system which is ideal for transporting.
Soft-Bearing Balancing Machines
High-precision balancing of rotors up to 127 tons
Home \ Balancing Machines \ Horizontal Soft-Bearing Balncing Machines \ Benefits
|
|
DIAMECH 2000
Vibration Diagnostics and Balancing Machines
Vibration Diagnostics and Balancing Machines