RotorBalancer - Standard and Optional Equipment
Standard Equipment
- RotorBalancer measuring instrument with built in rechargeable battery, operating dialog in English
- 2 Piezoelectric acceleration sensors AC102-1A
- 1 short sensor probe
- 1 holding magnet for curved surfaces, 1 holding magnet for flat surfaces
- 2 connecting cables, 6 m long
- 1 connecting cable, 1,5 m long
- 1 Laser optical reference sensor, with 1 magnetic stand, sets of reflective tape, 1 connecting cable, 6 m long
- 1 Electromagnetic reference sensor
- 1 BNC-converter for electromagnetic reference sensor
- 1 Modal hammer
- 1 CD-ROM with operating manual in English, with device firmware and RotorBalancer-Report Software
- 1 Data transfer cable (USB), 1.8 m long
- 1 power and charger unit
- 1 soft case for transporting the measuring instrument and accessories
Optional Equipment
Option 01
Piezoelectric acceleration sensors AC102-1A with holding magnet for curved surfaces
Option 02
Holding magnets for curved surfaces
Option 03
Holding magnets for flat surfaces
Option 04
Connecting cable 1,5 m long
Option 05
Connecting cable 6 m long
Option 06
Connecting cable 10 m long
Option 07
Connecting cable 25 m long
Option 08
Connecting cable for laser optical reference sensor, 6 m long
Option 09
Connecting cable for laser optical reference sensor, 10 m long
Option 10
Connecting cable for laser optical reference sensor, 25 m long
Option 11
Calibration adapter for verification and auto calibration of the signal conditioners of the measuring instrument
DIAMECH 2000: Vibration Diagnostic and Balancing Machines
phone: +7 (495) 223-04-20
fax: +7 (495) 223-04-90
e-mail: contact@diamech.ru
|
Vibration Diagnostic and Balancing Machines
Since 1989
