Ó 2007 DIAMECH 2000, All rights reserved
Vibration Analyzer / Balancer AGATE-M
AGATE-M is a compact 2 channel vibration analyzer and ideal tool for 2 plane balancing.
AGATE-M provides you with a range of functions for measurement and analysis, which you will not only find useful for field balancing, but which will also be beneficial for machine commissioning, service and maintenance.
AGATE-M makes field balancing of rotors easy - even for less experienced staff. Operators are prompted through the steps necessary to measure and eliminate rotor unbalance in a user friendly environment. An optimisation program enables unbalance vibrations to be recorded at up to four sensor positions and be reduced to a minimum by balancing in one or two planes.
AGATE-M supplied with AGATE-REPORT software, which considerably simplifies a process of processing downloading and storage of balancing results.
Features:
- Field balancing of rotor in one and two planes
- 2 channel FFT spectral analyzer
- Overall vibration measurement in accordance with relevant standards
- Spectrum, waveform, overall (RMC), envelope spectrum, 1/3 octave spectrum, bump test, amplitude and phase, peak-factor
- Oscilloscope function for visualization of vibration - time signature
- Laser optical reference sensor enables safe balancing at a distance of up to 0,5 m from the rotor shaft
- 6 hours operation on a single battery charge
- Firmware in English, German, French, Spanish or Russian
All about vibration instruments
DIAMECH 2000
|
||
Additional information
|
||
phone: +7 (495) 223-04-20
fax: +7 (495) 223-04-90
e-mail: diamech@diamech.ru
|
||
Specification
|
|||
Frequency Range
|
2 Hz to 10 kHz
|
||
Vibration Sensor
|
Piezoelectric Accelerometer 100 mV/g
|
||
Mesurement Inputs
|
2 channels for vibration
1 channel for rotor speed and
reference signal
|
||
Mesurement values
|
m/s² and g, mm/s and inch/s,
µm and mils
|
||
Signal detection types
|
RMS value, Peak-to-peak value,
Peak value
|
||
Field balancing
|
|||
Integrated balancing calculator, polar presentation of unbalance and test run vectors and printed balancing protocols via PC.
|
|||
Balancing rotor speed
|
120 to 20,000 rpm
|
||
Balancing planes
|
1 or 2
|
||
Measuring points
|
up to 4
|
||
Analyz Specification
|
|||
Overall vibration, Vibration velocity, Vibration acceleration, Vibration displacement, Waveform, Spectrum, Power spectrum, Envelop spectrum, 1/3 octave spectrum, Characteristics of acceleration / rundown, Amplitude / Phase, Peak-factor
|
|||
Averaging Types
|
Average free, Linear, Peak hold,
Exponential
|
||
Number of averages
|
0 to 100
|
||
Resolution
|
100, 200, 400, 800 lines
|
||
Power
|
Rechargeable battery (1,6 Ah)
|
||
Operating Time
|
6 hours continuous
|
||
Accuracy
|
5%
|
||
Display
|
128 x 128 LCD with backlit,
Hold and Low Battery indicators
|
||
Data upload to PC
|
RS-232
|
||
Mechanical construction
|
Aluminium housing of rugged and
shock-proof design
|
||
Protection Class
|
IP 54
|
||
Weight
|
1.200 g
|
||
Dimensions
|
220 x 110 x 38 mm
|
||
Operating Temperature Range
|
-10° to +60° C
|
||
AGATE-M Standard Kit
- AGATE-M measuring instrument with built in rechargeable battery, operating dialog in English, German, French, Spanish or Russian
- 2 Piezoelectric acceleration sensors AC102-1A
- Short sensor probe
- Long sensor probe
- 2 Holding magnets for curved surfaces
- 2 Holding magnets for flat surfaces
- 2 Connection cables 5 m long
- Laser speed sensor, with 1 magnetic stand, 2 sets of reflective tape, 1 connecting cable, 6 m long
- Power and charger unit
- CD-ROM with operating manual in English, German, French, Spanish or Russian
- CD-ROM with AGATE-REPORT software
- Soft case for transporting the mesuring instrument and accessories
Options
- Connection cable for acceleration sensor 6 m, 10 m, 25 m long
- Connection cable for laser speed sensor 10 m, 25 m long
- Calibration adapter for verification and auto calibration of the signal conditioners of the measuring instrument
- USB - RS-232 converter
DIAMECH 2000
Vibration Diagnostic and Balancing Machines
ISO 9000
